S205M Unitronic 50 kN

• Compression / Flexural tests, 50 kN max. capacity load
• Tensile tests, 25 kN max. capacity load (option mod. S205-05M)

With automatic load or displacement/deformation control, for testing:

• Soil: CBR (California Bearing Ratio), Unconfined compression, quick triaxial
• Asphalt: Marshall, splitting tensile, direct shear (Leutner), Auto SCB
• Concrete: Flexure on beams and tiles
• Cement: Flexure on 40x40x160 mm specimens, compression on 40/50/70 mm cubes, tensile on mortar briquettes (option mod. S205-05M)
• Metal, plastic, wires, ropes, textiles, papers etc.: tensile tests, 25 kN max capacity load (only with S205-05M model)
• Clay blocks: punching
• Rock and stones: Uniaxial splitting tensile

Equipped with suitable devices, Unitronic tester performs compression, flexural, splitting tensile and direct tensile tests, with automatic load or displacement/deformation control, within the limits of its max. 50 kN capacity for compression/flexural and 25 kN for tensile (model S205-05M).
The load is applied by a mechanical jack that is driven by a stepper motor and controlled by an internal microprocessor on a high-precision control board. Stroke electric end switches are applied to the load piston to save the machine from accidental handling. The crosshead foresees couplings to fix the different test devices. The stress is measured by an electric load cell and the displacement control is achieved directly by the high-technology electronic board incorporated into the machine within a variable speed range up to 51 mm/min to cover the Marshall test. Unitronic 50 kN is supplied without accessories and software to perform specific tests that must be ordered separately.